OpenLOCK stone walls and a fence

Just painted these modular walls from Printable Scenery.

They are made for the OpenLOCK system, and click into each other easily with clips. They are just as easily disassembled.

These are from Stone Walls set, and give you a huge variety of pieces to build whatever walls you’d like.

If a rickety old fence is more your thing, then these ones, from the Ye Old Fence set might be something for you.

Excellent pieces, as always with Printable Scenery.

3D-printer and first objects

One of local electronics shops, Kjell & Company, has started to sell 3D-printers and I looked at one of their videos on how it worked and was sooooo tempted.

I showed it to Mrs Miniaturesman and The Daughter and you have to figure a conversation going something like this

Mr Miniaturesman: Hey, look at this.

Mrs Miniaturesman: Bah, useless.

Daughter: Cool!

Mr: I do think one could find a lot of uses for it, really, and it’s plug and play and finally affordable.

Mrs: Bah, useless.

Daughter: Coooool!

Mr: The Oldest Son could learn to program 3D objects.

Mrs: Bah, useless. You want it for your hobbies, I guess.

Mr: Ehr, yes, obviously.

Daughter: Cool

Mrs: Bah, useless, but buy one if you want to.

Mr: Considering the ability to print spare parts and such I think the potential…. (long silence) … What did you say?

Mrs: You seem to want one a lot and I’ve heard you talking a lot about the tech, so go on and buy one.

Mr: (silence)

Next day I bought one.

Printing a wall section with the transparent PLA-filament that was supplied with the printer. The small 1/4 kg spool is situated under the print-bed. Handy if you want it out of the way, but annoying as you can't see how much is left until between prints when you remove the print-bed.

Since then it’s gone hot (well, obviously) and I’ve printed this and that to try it out and check what works and what doesn’t. It’s a lot of trial and error, which setting to use for which sort of piece and so on. With a spreadsheet on all my experiments with notes on what worked and what didn’t (yes, I’m an engineer at heart) I think I’ve started to get a hang of it now.

A soon bought a large spool of white PLA-filament and feed it from an obviously home-made external source.

Most of the stuff is from Printable Scenery and their Winterdale 2 Indiegogo crowd-funding campaign. If you’re interested in their products they have a new campaign at Kickstarter with a lot of ruins and a chance to buy into some of the stuff from the previous campaign.

This is some of the stuff that’s printed so far:

Some of the first objects I printed, from different sources.

Parts for a large tower.

A medieval crane for the harbour.

Walls, painted and ready for action

More walls, a grave-monument, two pieces of pier and some stone slabs.

A small mausoleum. This was printed with thin walls and is very fragile. One of those learning experiences.

A test on statues, printed with different layer thicknesses. 50, 150, 200 and 300 micrometer.

There is a noticeable layering, but it looks okay for stone structures and wood if it goes with the grain. If you want steel plates then it will probably be less than satisfactory. It all depends on what you want from your terrain, I guess. Seen from an arm-length away most looks perfectly presentable.

All in all, this is a great buy for a first printer. It’s affordable, plug-and-play, easy to use and looks nice. There are downsides, one is the limited print-volume, but Printable Scenery has everything made in both larger pieces and also in smaller modules that you can fit into this printer.

You’ll see quite a lot of printed stuff here in the future.

Welcome new follower Lorenzo Calvi with the blog Zerloon Place, where you'll find pulp, fantasy, SF and more. Give it a try!
A big "Hi!" to Google + follower Mark with blog £1 Wargames Rules, where you might find some downloadable scenery for your ordinary printer.

Another terrain-building weekend

Thomas came over this Saturday for another day of terrain-building and we accomplished quite a lot and used a lot of new tools – 3D-printer, static grass applicator and hot-wire cutter.

Static Grass Applicator

I bought a static grass applicator from WWS last year for a project that was delayed and it just laid there in a box. That one was used a lot during the day and to very good effect. We were both very satisfied with how it worked and the results. What we did was brush the ground with wood-glue and put on a layer of 2mm static grass. That will be so thick to practically cover the ground, you essentially don’t see the ground under the static grass. Over that we sprayed glue and put on another layer of 4 or 6mm static grass. The result is fantastic.

Hot-wire cutter

I bought this Proxxon hot wire cutter from the webshop Signalsidan a couple of weeks ago and used it for the floating rocks below. With this you can bend your cutting wire into whatever shape you want and then cut effortlessly, for example a river-bed. Thomas had a go with it and it’s the same here, very useful and a very good buy. It will be incredibly useful.

We bent the wire to a U-shape and Thomas played with it. A decent river-bed for a first try.

All in one piece (well, he did a little bit of carving after the big piece came off)

3D-printer

I bought this a couple of weeks ago and showed Thomas a bit of what I had printed and how it worked. There will be a post on the printer soon.

That’s the hardware, now for what was finished.
Flying boulders
These are for next game in the Pulp Alley campaign at the club. The Perilous Island campaign is nearing its end and the heroes will see the Island go up in flames and when that happens we need pieces of levitating broken ground, and these are the pieces. Think of them with black smoke obscuring the bottom pieces (you’ll see them in an AAR here soon).

I cut these with the hot-wire cutter, glued sand on top and sides and painted it chocholate brown before our terrain-day. 

Here they are, ready for action.

Hedges

We started these last year on a terrain-day and they were waiting for static grass. It’s rubberized horsehair hot-glued onto cork (DUGA from IKEA), dunked into coloured hamster bedding (all this done last year) and now grassed. We used a darker tone of 2mm static grass (applied over wood glue painted directly over the cork, no paints) and when dry we sprayed glue on top of the original layer of grass and applied a layer of lighter 4mm grass (or was it 6mm, can’t remember)

A pic from last year when we started these hedges.

Here they all are

Brambles

A very short experiment where we took a piece of rubberized horsehair, sprayed it with glue and applied 4mm static grass. The result is, in my opinion, a perfect piece of brambles or similar bush to be used as scatter terrain. I’ll do lots more of these.

Castle Ruin

I had this F201 Castle Ruin from Amera. The stonework was painted, ground covered with brown building acrylic with sand sprinkled over and painted chocolate brown. It was also waiting for static grass and we covered it in several colours of 2mm grass and topped that with 4 and 6 mm static grass. It turned out great, if I might say so.

only 2mm grass

4 and 6 mm grass added

3D-printed walls

I had these already painted and we grassed them. I guess there will be lots and lots of printed walls in the future, as you can never have enough. These are scaled for 28mm but I’ll do some down-scaled for 20mm scale too.

The new Harbour

We cut out the pieces for the new harbour also. It will be a big 120x180 cm piece, enough to cover one of the gaming tables at the club. Now I “just” have to scribe in the stonework. That will be for rainy days…

The new sections. The Bridge stands where I will have a removable canal.

Parts from the earlier harbour will be converted (i.e., cut up) for use in the new set-up. This part will be cut along the table-edge.

Same with this part. Cuts at the table-edge and by the pink foam.

A good terrain-making day!

Rice Paddies

Gothcon XL is in just a couple of days and so is our game of Chain of Command set in Dien Bien Phu – Hell in a Very Small Place. It’s a participation game where you will play either Viet Minh or French Colonial Paras, like we did in our test-game a couple of weeks ago.

Here we have the finished rice paddies in fallow we started working on during our terrain weekend. It’s amazing what some paint and water effect can do.

I used this water effect for the first time. It didn't look too good as is, so I added some of the red-brown paint to get a muddy look. I wouldn't have minded one more layer of the guck, but it takes a couple of days to dry, though, and I don't want to risk it being sticky when I have to pack it up.

With that, everything on my list is done and packed. I’m ready for some games and if you happen to be at Gothcon do come by and say hi! We will probably set the game up on Thursday evening and play all through Friday and Saturday, even though I’m off to play some other stuff also.

Viet Minh showing just how good clear bases are :-)

Terrain for Dien Bien Phu

We, in this case the Scandinavian Ladies, will have a participation game at this year’s Gothcon, and this time it will be Dien Bien Phu in 28mm scale and using the Chain of Command rules.

Thomas is the grand master of DBP and is in charge of everything, and I’m in the position of just following orders. One of the orders is to paint some Viet Cong soldiers, and they are bought and on their way (excellent stuff, that, as they can be used in pulp games also)

Painting the brown fleece to get something that looks like a muddy and shot-up field.

Another order was get some terrain finished. The best way to do that is to have a terrain-making-day and we chose a sunny and beautiful day to hole up in my cellar with MDF, filler, paint, fleece, foamboard, hot-glue gun, cork and whatnot.

The finshed thing, ready for some serious action.

An afternoon with a few tasty beers and without any burnt fingers got us (me, Thomas and Henke) a finished ground-cover and some started rice-paddies and bamboo-groves.

Thomas hot-gluing foam-board sides to cork-sheets (the excellent and cheap AVSKILD cork place mat from IKEA) to form the outlines of a rice paddy

Filler and a pre-paddy.

And with some filler applied with a brush it starts to look interesting. Add a crater or two and we start to get an idea on what to expect.

Bases for the bamboo-groves and also for stands of barbed wire

Thomas got the bamboo-not-groves-yet while I got to finish the rice-paddies. Stay tuned for more on that soon.